DURACOAT

Home

DURACOAT FINISHES

DuraCoat is a hard polymer that is self lubricating to a certain extent; extremely hard, oil, solvent, and wear resistant. It resists 100 inch pounds of direct impact and 80 inch pounds of reverse impact. Its pencil hardness runs H to 2H. DuraCoat has passed a 300 hr salt spray test, which far exceeds military requirements for firearms finishes. Major manufacturers such as DSA utilize DuraCoat finishes on their rifles. DuraCoat has proven to hold up extremely well under field conditions. Even on parts such as FAL bolts, which are subject to significant abrasion as the bolt cycles, DuraCoat has held up well and proven to be extremely durable. DuraCoat will dry to the touch in 20 min and can be used after curing 6 - 8 hrs. However it will continue to cure for 4 to 6 weeks after application. DuraCoat is not a flash cure application which will become brittle after curing resulting in chipping and flaking. DuraCoat cures slowly so it remains flexible after it cures which contributes to its excellent abrasion and wear resistance. We like to say DuraCoat doesn't wear out, it wears in. DuraCoat can be applied over just about any surface including, metal, plastic, or wood as long as the surface is properly prepared.

How durable is DuraCoat?
	DuraCoat is permanent. With normal use, a firearm finished with DuraCoat will last several lifetimes.
What is DuraCoat?
	DuraCoat is a two part chemical coating. Unlike other firearm finishes, DuraCoat was created specifically for firearms. Other firearm finishes are "spin-off's" from other industries.
Is DuraCoat Teflon based?
	No. Teflon is a lubricating coating which is great for internals, but will not wear as well as DuraCoat on the exterior surface of a firearm. DuraCoat's combination of elasticity and hardness creates a finish impervious to impact, scratching and the elements. Some users say DuraCoat displays some lubricating qualities, but this phenomenon was never intended when DuraCoat was created.

When is DuraCoat fully cured?
	DuraCoat is dry to the touch in 20 minutes, can be handled in 1 hour and is ready for use overnight. Although DuraCoat will gain most of its final hardness, elasticity and chemical resistance over a 2-3 week period, time will continue to enhance DuraCoat's characteristics over a lifetime. DuraCoat, like fine wine, gets better with age. As we say, "DuraCoat wears in, not out."

I hunt along saltwater. Will DuraCoat withstand the salty environment?
	Certainly. DuraCoat is well suited for salty environments. One of DuraCoat's attributes is its extreme ability to resist salt corrosion. A firearm coated with DuraCoat simply will not rust...EVER!

Will DuraCoat burn off my barrel?
	DuraCoat can withstand temperatures as high has 500-600 degrees F. With "normal" shooting, your barrel will never get close to being that hot. If you are fortunate enough to own a transferable machine gun, or if you like to "blaze" with your semi-auto, do not put DuraCoat on your barrel, as your barrel temperature will rise to over 1,000 degrees F. In those cases, use DuraHeat. Our DuraHeat coating can handle temperatures up to 1,800 degrees F.
How easy is DuraCoat removed?
	Not easy at all. The elastic nature of DuraCoat resists blasting. A qualified individual, with the proper blast media, can safely remove DuraCoat without damaging the surface of the firearm. Be careful. In most cases, we recommend lightly blasting the surface, being cautious not to remove any DuraCoat. Just "beat up" the DuraCoat giving it "tooth" so your new application of DuraCoat has something to adhere to.